Reliable monitoring for small hydrogen leaks in a variety of industrial and commercial facility environments is now available with the TS4000H Intelligent Hydrogen Gas Detector from General Monitors, which accurately detects hydrogen at 0-500 ppm levels.
The gas detector continuously monitors for hydrogen. It features a precision electrochemical hydrogen sensor that has a T90 response of under 30 seconds and minimal zero shift across its operating environmental conditions. Furthermore, it is unaffected by short-term (≤ 2.5min) exposure to hydrogen concentrations up to 50% LEL.
The detector features 4-20 mA output, 8 amp relays, HART or Modbuscommunications, and a 3-digit LED display that displays gas concentrations in ppm. The system also displays fault codes for troubleshooting and provides complete status to the control room. All of the electronics are contained within an explosion-proof housing so that gas sensor information can be processed at the sensor site. The gas sensor may be remote mounted up to 610 meters away from the electronics.
For worldwide application, the detector complies with ATEX, CSA, CE, GOST, and is certified for use in SIL 2 environments.
In addition to monitoring for low hydrogen levels, the TS4000H can be configured to detect a variety of other toxic gases including: ammonia, carbon monoxide, chlorine, chlorine dioxide, hydrogen chloride, hydrogen sulfide, nitric oxide, nitrogen dioxide, oxygendeficiency, ozone, and sulfur dioxide.
Toxic gas detector
