<?xml version="1.0" encoding="ISO-8859-1"?>
<!-- generator="FeedCreator 1.7.2-ppt (info@mypapit.net)" -->
<rss version="2.0">
    <channel>
        <title>[PCN Europe] New products</title>
        <description><![CDATA[[PCN Europe] New products]]></description>
        <link>http://www.pcne.eu/content/new-products/index.html</link>
        <lastBuildDate>Fri, 10 Sep 2010 15:34:12 +0100</lastBuildDate>
        <generator>FeedCreator 1.7.2-ppt (info@mypapit.net)</generator>
        <image>
            <url>http://www.pcne.eu/fileadmin/templates/img/top_logo_new.gif</url>
            <title>[PCN Europe] New products</title>
            <link>[PCN Europe] New products</link>
            <description><![CDATA[[PCN Europe] New products]]></description>
        </image>
        <item>
            <title>Coriolis Meters for Low Flow Applications Emerson Process Management has expanded its Micro ...</title>
            <link>http://www.pcne.eu/content/new-products/pcn/coriolis-meters-for-low-flow-applications/index.html</link>
            <description><![CDATA[Emerson Process Management has expanded its Micro Motion® ELITE® Coriolis meter offering for low flow applications. The new meters deliver highly accurate measurement, are compact in design and available in two sizes, 2mm and 4mm nominal diameter, delivering +0.05% liquid flow accuracy,&nbsp; +0.35% gas accuracy, +0.0005 g/cc liquid density accuracy for flow rates of 2 kg/h to 330kg/h.&nbsp; 
Low flow rate applications often require measurement devices that can deliver high turndown capability with uncompromising measurement performance. They also require meters that are drainable and have a compact footprint. The precisely engineered Micro Motion ELITE Coriolis meters offer stability and robust performance in a drainable, slim and lightweight package.&nbsp;]]></description>
            <pubDate>Tue, 07 Sep 2010 13:49:30 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/080341a798.jpg" length="6751" type="image/jpeg"/>
        </item>
        <item>
            <title>The ultimate dirty service trim for control valves Fisher® Dirty Service Trim</title>
            <link>http://www.pcne.eu/content/new-products/pcn/the-ultimate-dirty-service-trim-for-control-valves/index.html</link>
            <description><![CDATA[Fisher® Dirty Service Trim from Emerson is a multi-stage anti-cavitation trim ideal for use with many control valves. DST is used in severe services where fluid may have entrained particulate capable of plugging passages or causing erosion damage to conventional anti-cavitation trims. &nbsp; 
Typically, the trim is used in high pressure drop applications up to 290 bar in the chemical, refining, oil and gas production and power industries. &nbsp; 
DST uses a combined axial and radial flow path that features large openings, allowing particulate up to 19mm to pass through. It is available with up to 6-stage trim, and with a globe or angle body.&nbsp;]]></description>
            <pubDate>Tue, 07 Sep 2010 13:48:07 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/7392959dfd.jpg" length="6131" type="image/jpeg"/>
        </item>
        <item>
            <title>New Air Blower LAM-200 With superior 12 m³/h airflow</title>
            <link>http://www.pcne.eu/content/new-products/pcn/new-air-blower-lam-200/index.html</link>
            <description><![CDATA[Based on their patented “linear shuttle” technology, Nitto Kohki have introduced the larger LAM-200 blower to their market leading range of LA series blowers. The eagerly anticipated big brother is born! 
Air-blowers are commonly used in wastewater treatment systems, aquatic &amp; pond applications as well as sulphur scrubbing on biogas applications. The “linear shuttle” technology removes the need for troublesome diaphragms and so offers the benefit of much longer lifetimes. Their existing product range offered air flow of 7,2 m³/h at 180mbar (normally 1.8 meter water depth ), whilst their new big brother gives a superior 12m³/h airflow at 200mbar (normally 2 meters water depth). Therefore the new LAM-200 can be used in larger plants that historically were unable to take advantage of Nitto Kohki’s superior “linear shuttle” technology. 
The LAM is also an interesting alternative to rotary disc and by-pass channel pumps. With a power consumption of only 220W and whisper-quiet 48dB(A) noise, the new model is an ecological and quiet solution.]]></description>
            <pubDate>Tue, 07 Sep 2010 13:37:04 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/ec57e486ed.jpg" length="12914" type="image/jpeg"/>
        </item>
        <item>
            <title>Nitto VC0100 Vacuum Pump The Diaphragm Pump for all applications</title>
            <link>http://www.pcne.eu/content/new-products/pcn/nitto-vc0100-vacuum-pump/index.html</link>
            <description><![CDATA[Nitto Kohki’s VC0100 is characterised by its suitability for many varied applications. It is compact, lightweight, silent (35dB) and with a performance of 6 l/min at 40mbar, yet with a power consumption of only 6W it is becoming a very attractive solution for OEM’s. Due to its low power consumption it has generated significant interest where low power consumption is important, e.g. in mobile fuel cells, portable sensor technologies, measurement applications and medical technology. In addition to the standard VC0100 being available in different voltages, it is also available as specials: A pressure-only version with an internal air filter simplifying connections and minimising noise: A combined vacuum/pressure version specifically for vacuum applications, and finally if 6W is still too high there is a further power-optimized version with only 3,5 W power consumption!]]></description>
            <pubDate>Tue, 07 Sep 2010 13:36:49 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/da61f94b3b.jpg" length="21151" type="image/jpeg"/>
        </item>
        <item>
            <title>Nitto Quick-Release-Couplers Higher flow rate – higher productivity</title>
            <link>http://www.pcne.eu/content/new-products/pcn/nitto-quick-release-couplers/index.html</link>
            <description><![CDATA[Based on the popular SP Cupla model which is used globally in high quantities the new successor model SP-A has been developed and already introduced by Asian’s leading quick connecting coupler manufacturer Nitto.The flow rate could be increased by remarkable 64% compared to the previous model. This new increased flow rate sets a new milestone compared to comparable couplers in the market.A higher flow rate means higher productivity – hydraulic cylinders will move faster, die-casts will be cooled earlier. As a consequence the production costs are decreased.Thanks to the newly designed shape of the valve head, the valve returns automatically and smoothly to its original position when disconnected. This structure enhances safety by sealing the flow passage of individual sockets and plugs.SP-A couplers can be used in various applications up to a pressure of 75 bar.The maximum size is 1”. All versions are made in PT female thread. Materials: steel, brass, stainless steel SUS 304.Beside this new model this famous manufacturer offers a broad range of couplers for nearly every application.]]></description>
            <pubDate>Tue, 07 Sep 2010 13:35:20 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/8c1aa074b4.jpg" length="10519" type="image/jpeg"/>
        </item>
        <item>
            <title>SMART &quot;S&quot;-MS gas detector The first with double technology sensor head</title>
            <link>http://www.pcne.eu/content/new-products/pcn/smart-s-ms-gas-detector/index.html</link>
            <description><![CDATA[SMART &quot;S&quot; Gas Detectors are SIL2 (3) certified gas detectors, ideal to monitoring flammable and toxic compounds wherever the need of a fail safe gas detection system is required. &nbsp; SMART &quot;S&quot; come complete with Infrared sensors, catalytic sensors or electrochemical cells and the sensors behaviour is constantly microprocessor controlled. &nbsp; Amongst this range, SMART S-MS for flammable gas represent the greatest innovation. This detector come complete with a double technology sensor head where Infrared and Pellistor sensor are integrated to allow compare two independent reading: this grants the user a very high reading accuracy with close to zero false alarms. &nbsp; For further details, we invite readers to contact Sensitron Italy at sales@sensitron.it]]></description>
            <pubDate>Tue, 07 Sep 2010 12:18:11 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/a45bd6a21d.jpg" length="1601" type="image/jpeg"/>
        </item>
        <item>
            <title>SMART3 G: the most cost effective ATEX SIL1 gas detector implemented to work connected to ...</title>
            <link>http://www.pcne.eu/content/new-products/pcn/smart3-g-the-most-cost-effective-atex-sil1-gas-detector/index.html</link>
            <description><![CDATA[SMART3 G gas detectors represent the upgraded version of Sensitron' SMART3 C, implemented to work connected to Sensitron SIL rated control panels. SMART3 G are fully ATEX certified and comply with the EN50402 &amp; IEC61508 1-7 (European SIL standard). They are supplied in robust alloy enclosures and feature one-man non intrusive calibration to allow for an accurate calibration. SMART3 G employs industrial grade catalytic sensors, electrochemical cells and Infrared sensors to measure flammable and toxic contents. The detectors are microprocessor controlled and provide self-diagnostic procedures to control the HW and SW correct operation as well as a zero tracker to maintain the detector zero point steady from possible drifts caused by thermal or physical variations.]]></description>
            <pubDate>Tue, 07 Sep 2010 12:16:44 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/c6cf8bb6a6.jpg" length="1588" type="image/jpeg"/>
        </item>
        <item>
            <title>ATEX cylinder sensors for hazardous atmospheres</title>
            <link>http://www.pcne.eu/content/new-products/pcn/atex-cylinder-sensors/index.html</link>
            <description><![CDATA[The MK502A T-slot cylinder sensors for ATEX Namur applications complement the ifm range of cylinder sensors for pneumatic cylinders. The wear-free and robust sensor is certified for the ATEX categories 1G/1D (zones 0/20), developed to the EN 60947-5-6 standard and offers IP 65/67 protection.
The sensors offer the following advantages: self-locking mechanism, strain relief, easy single-handed installation, clearly visible LED display for the switching status. With the range of accessories, these sensors can be fixed to common T-slot, tie rod, integrated profile or trapezoidal slot cylinders. 
In addition to the sensors, the company offers a wide range of switching amplifiers. It is suited for ambient temperature of -25 to 70°C for applications in silo hatches, elevators, mills or conveying technology. The cylinder sensor with AMR cell, connects to certified intrinsically safe circuits with the max. values U = 15V / I = 50mA / P = 120mW.]]></description>
            <pubDate>Mon, 06 Sep 2010 16:05:57 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/757ea00310.jpg" length="16310" type="image/jpeg"/>
        </item>
        <item>
            <title>Hot-galvanised pipework system for bulk goods</title>
            <link>http://www.pcne.eu/content/new-products/pcn/hot-galvanised-pipework-system/index.html</link>
            <description><![CDATA[Jacob offers a hot-galvanised pipework system, ex warehouse, which is specially designed for conveying bulk goods in outdoor areas. It has been developed in response to the particular requirements of the grain processing industry. With a wall thickness of 3 mm, the pipe system is suitable for conveying abrasive bulk materials such pellets, grain, and other coarse-grained products, for example, but still remains easy to install. 
The standard hot galvanised range includes 500, 1000 and 2000mm lengths of straight pipes, segments, cone pieces, 45° forks, spouts from square to round, and inspection pieces. Also included in the range is the hot galvanised two-way valve with manual operation or alternatively with drive. 
The various components are series manufactured as an easy-to-install modular system, whereby tightly sealed connections can be made quickly and easily using galvanised pull-rings with sealant. The hot galvanised pipes and fittings are available in the common diameters DN 200, 250, and 300mm.]]></description>
            <pubDate>Mon, 06 Sep 2010 16:02:12 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/1cfc45ac50.jpg" length="1284" type="image/jpeg"/>
        </item>
        <item>
            <title>Laser particle sizer offers measuring range of 0.08-2000µm</title>
            <link>http://www.pcne.eu/content/new-products/pcn/laser-particle-sizer/index.html</link>
            <description><![CDATA[The laser particle sizer Analysette 22 MicroTec plus by Fritsch is a compact dual-laser module-system with fast-switch-system. The measuring cells are located in convenient cartridges, which during the switch from wet to dry measurements are simply exchanged without tools. Any unused cartridge can be stored in the corresponding dispersion unit. 
The variable measuring range offers the choice between two individual measuring ranges or the combination of both to a third. This allows for flexibility and an overall measuring range from 0.08-2000&#956;m with a resolution of up to 108 measuring channels. The wet dispersion unit is equipped with a powerful centrifugal pump for the transport of even heavy particles with a high concentration. With the help of an intelligent liquid-level-sensor, three individual amounts of liquids can be set by default and the use of common organic solvents as suspension liquids is possible. The flexible software manages even complex measurement sequences fully automatic and reproducible.]]></description>
            <pubDate>Mon, 06 Sep 2010 15:59:54 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/2cfab3388f.jpg" length="10432" type="image/jpeg"/>
        </item>
        <item>
            <title>A new butterfly valve for almost any application The GEMÜ range of butterfly valves is now one ...</title>
            <link>http://www.pcne.eu/content/new-products/pcn/a-new-butterfly-valve-for-almost-any-application/index.html</link>
            <description><![CDATA[The new GEMÜ D480 wafer pattern butterfly valve is available in nominal sizes DN 25 – 1400. A wafer type version, an end-flange version with threaded holes and a double flange version are available body configurations. The installation length is in accordance with EN 558-1 basic series 20. Connection standards to DIN (PN10/16), ANSI 150, JIS and BS can be supplied. Standard pressure ratings are 10 bar and 16 bar. A soft-sealing concentric version of the D480 butterfly valve is suitable for pressures up to 25bar. The butterfly valve complies with the safety requirements of Annex I of the European Pressure Equipment Directive 97/23/EC for fluids of group 1 and 2. &nbsp; 
A wide range of materials and coatings is available for the body and butterfly disc extending from SG iron to superduplex steels. Coating materials are Resicoat®, Rilsan® or Halar®. The temperature limits for the working medium range from -40°C up to max. 200°C, depending on the material selected. &nbsp; 
Seats and approvals The seats are available in 17 different versions from EPDM to Viton® (FPM). These include an FDA compliant EPDM and a version for drinking water. The drinking water version fulfils the requirements of ACS, KTW, WRAS and W270. Exchangeable seats or seats vulcanised to the body can be supplied. Vulcanised seats are particularly suitable for applications involving high pressures, mechanical stress and vacuum. &nbsp; 
Operators Type series D480 features a top flange in accordance with EN ISO 5211 for mounting various operators. Hand lever, gearbox, pneumatic actuators and motorized actuators in an open/close version or control version are available. The pneumatic GEMÜ D481 butterfly valve is manufactured with the tried-and-tested GEMÜ ADA/ASR or DR/SC actuators in single or double acting versions. The pneumatic actuators can be equipped with an extensive range of accessories such as pilot valves, electrical position indicators, combi switchboxes and positioners. Accordingly, the new valves can be integrated into any automated system without difficulty. &nbsp; 
Areas of application for GEMÜ D480 The great variety of body/disc materials and coatings as well as the wide range of seats provides for an extensive range of possible applications. From standard discs in SG iron to super duplex discs or Halar coated discs for corrosive media, no wishes are left unfulfilled. The butterfly valve is used in the following industries for example: &nbsp; 
Chemical industry Mining and metal extraction Steel works Water and wastewater treatment Sea water desalination Pharmaceutical and semiconductor industry General industrial processes]]></description>
            <pubDate>Mon, 06 Sep 2010 11:17:04 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/091ee20aad.jpg" length="13475" type="image/jpeg"/>
        </item>
        <item>
            <title>New motorized actuator for linear valves GEMÜ has developed a new motorized open/close actuator ...</title>
            <link>http://www.pcne.eu/content/new-products/pcn/new-motorized-actuator-for-linear-valves/index.html</link>
            <description><![CDATA[The valves using this actuator are ideally suited to applications without plant air. At the same time, the operating costs of the motorized actuator are lower than those of a comparable pneumatic actuator or even a solenoid valve. In a pneumatic actuator or a solenoid valve with control function normally closed, the valve must be supplied with compressed air or consumes power the entire time that it is open. The new motorized actuator, with a power consumption of approx. 24 W, is designed so that it only requires power to position the valve. When it has reached the closed or open end position, the integrated limit switch switches the actuator off automatically and holds the valve in position until the next control signal. A seal adjuster can be implemented using the adjustable limit switch of the CLOSED position. The electrical connection is made via M12 connectors. &nbsp; 
The actuating speed is between 4-10 mm/sec., depending on the nominal size. The GEMÜ S680 diaphragm valve closes in approx. 0.5 sec. in nominal size DN 15, and for DN 25 in approx. 2 sec. The even closing process noticeably reduces water hammer in comparison to fast closing pneumatic and solenoid valves. The compact actuator is no wider than the valve body and is therefore ideally suited for use in space-saving valve batteries. &nbsp; 
The diaphragm valve has two distinct advantages over the solenoid valve: firstly solenoid valves in the sizes up to DN 50 are either directly controlled or servo assisted. Directly controlled valves require very large solenoids for the equivalent operating pressure, and therefore consume a lot of power and generate a considerable amount of heat. Solenoid valves are preferably servo assisted to avoid this disadvantage however very small control apertures are therefore necessary which are susceptible to solids and particles in the medium. Blocked control apertures cause the valves to fail. Particle filters to protect the solenoid valves increase procurement and operating costs and must be taken into account from a TCO point of view. By contrast, the design of motorized diaphragm valves makes them insensitive to particles and solids in the medium. Even grains of sand and pieces of limescale in water pipes, for example, impair neither the function nor the tightness of the valves. The second advantage of the diaphragm valve is its design, which creates a hermetic separation between the actuator and the working medium without additional parts or gaskets. Of course, this is also possible in solenoid valves, but it increases their complexity and their cost. &nbsp; 
The new motorized actuator is offered in two valve designs. The GEMÜ S680 diaphragm valve is available in PVC-U, reinforced PP and brass in sizes DN 10 and DN 15. Ratings are max. 6 bar, depending on nominal size and maximum permissible operating temperatures are 60°C. The operating time is between 0.5-1 sec., depending on size. &nbsp; 
The GEMÜ S580 angle seat globe valve is also available in sizes DN 10 and DN 15. Reinforced PP and brass are available as valve body materials and the ratings as per the S680. The operating time is between 0.8-1 sec., depending on size.]]></description>
            <pubDate>Mon, 06 Sep 2010 11:16:46 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/bf44808faa.jpg" length="8458" type="image/jpeg"/>
        </item>
        <item>
            <title>GEMÜ Product Range Innovative technology</title>
            <link>http://www.pcne.eu/content/new-products/pcn/new-deal-gemue-product-range/index.html</link>
            <description><![CDATA[GEMÜ provides engineered control solutions for a large number of process and engineering plants, such as: 
Industrial plant and machine construction Automobile industry Water / waste water treatment Chemical industry Steel works Mining and metal extraction Power stations Shipbuilding industry Petrochemical industry Paper industry Pharmaceutical and biotechnological industriesFoodstuff and beverage industries&nbsp;Microelectronics and semiconductor industries &nbsp; 
State-of-the-art factory equipment and machinery plus a motivated team ensure the best service through our world-wide network of distributors and stockholding subsidiaries. We are constantly making investments in order to optimise our existing products and to develop new products. Thus we can provide technical solutions for individual applications.]]></description>
            <pubDate>Mon, 06 Sep 2010 11:16:27 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/3a8c960f1b.jpg" length="1352" type="image/jpeg"/>
        </item>
        <item>
            <title>New stainless steel ball valves for use in hygienically demanding applications GEMÜ has ...</title>
            <link>http://www.pcne.eu/content/new-products/pcn/new-stainless-steel-ball-valves-for-use-in-hygienically-demanding-applications/index.html</link>
            <description><![CDATA[Ball valves are subject to increased hygienic requirements in pharmaceutical production where valves typically have to exhibit minimum deadleg areas and smooth surfaces. Media remaining trapped in cavities of valves can contaminate medicines so cavity filling seats are incorporated to improve cleanability of residues and crystallising media. &nbsp; 
The cavity filled seat of the 740 series from GEMÜ consists of two special half shells made from TFMTM. This innovative sealing material complies with the stringent requirements of the US Food and Drug Administration (FDA) and conforms to FDA 21 CFR 177.1550. TFMTM is as resistant to chemicals and heat as conventional PTFE. It is also distinguished by a significantly smoother surface, a small pore volume, low cold flow properties, very low deformation under load and an almost universal chemical resistance. The internal surface finishes of the pipe connections and balls are mechanically polished and also electropolished to a low surface roughness of 0.6µm in the media wetted area which ensures good cleanability (CIP) and sterilisation (SIP) of the valves. &nbsp; 
The spindle is triple sealed by pretensioned spring washers, V-rings and a conical gasket. The sealing package can be readjusted and requires little maintenance. The series is compliant with the TA Luft (German Clean Air Act). At the same time, this design ensures low friction as well as a long service life of the sealing system in conjunction with the finely machined spindle. &nbsp; 
When open, the ball valves offer a good flow capability. The maximum permissible operating temperature is 180°C. In the case of steam, the maximum permissible steam pressure is 8 bar. The maximum permissible operating pressure is 63 bar for liquids in the nominal sizes DN 8 – 50 and 55 bar in the nominal sizes DN 65 – 100. Butt weld spigots to DIN 11850, DIN ISO 1127, ASME BPE as well as clamp connections in accordance with ASME BPE are available as standard connections. Other connections are available on request. &nbsp; 
The GEMÜ 740 is a 3-piece ball valve with top flange. Besides the hand lever, pneumatic quarter turn actuators (GEMÜ 741) and motorized actuators (GEMÜ 748) can also be mounted. The actuators are compatible with other ball valve actuators such as the GEMÜ 751 and GEMÜ 738. Extensive instrumentation in the form of electrical position indicators, combi switchboxes, as well as positioners and process controllers is available for the pneumatic actuators. &nbsp; 
The ball valves comply with the safety requirements of Annex I of the European Pressure Equipment Directive (PED) for fluids of groups 1 and 2.&nbsp; They are suitable for use in non-particulate, inert, corrosive, liquid, gaseous media and steam. Besides applications in the pharmaceutical industry, they are ideal for applications in the cosmetics sector, biotechnology, process engineering or the foodstuff industry.]]></description>
            <pubDate>Mon, 06 Sep 2010 11:09:17 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/2d1c14c3bd.jpg" length="10784" type="image/jpeg"/>
        </item>
        <item>
            <title>FLUXUS® Non-Invasive Liquid Flow Measurement Steel, iron or plastic pipes; sludge, sand, acids ...</title>
            <link>http://www.pcne.eu/content/new-products/pcn/fluxusR-non-invasive-liquid-flow-measurement/index.html</link>
            <description><![CDATA[FLUXUS® measures flow non-invasively using ultrasonic technology. Clamp-on ultrasonic transducers are simply clamped onto the outside of the pipe and never come into contact with the liquid. Pipe work is not necessary. &nbsp; 
Non-invasive clamp-on technology provides maximum flexibility and the sophisticated electronics of FLUXUS® ensure the highest possible reliability. The measuring system, consisting of the transducer and VARIOFIX transducer system, can be optimally adjusted to suit individual requirements. &nbsp; 
The FLUXUS® flowmeter series comprises a broad variety of transmitters and transducers: from basic models for standard applications up to robust measuring solutions for offshore use or for hazardous metering locations. &nbsp; 
From 6 mm tubing to 6.5 m penstocks - FLUXUS® offers reliable measurement on the smallest of pipes as well as very large pipes. &nbsp; 
Typical Applications: Chemical Industry Petrochemical Industry Oil Exploration Pharmaceutical Industry Semiconductor Industry Food and Beverage Industry Water and Wastewater Industry Power Generation District Energy]]></description>
            <pubDate>Mon, 06 Sep 2010 10:27:06 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/3b38f761fd.png" length="8306" type="image/jpeg"/>
        </item>
        <item>
            <title>FLUXUS® G Non-Invasive Gas Flow Measurement FLUXUS ® G gas flowmeter series sets standards in ...</title>
            <link>http://www.pcne.eu/content/new-products/pcn/fluxusR-g-non-invasive-gas-flow-measurement/index.html</link>
            <description><![CDATA[FLEXIM's ultrasonic gas flow meters use the proven clamp-on transit-time correlation technique also employed for the F series liquid meters. Special ultrasonic transducers are simply clamped onto the outside of the pipe and never come in contact with the gas. &nbsp; 
The FLUXUS® G series contains a broad variety of transmitters and transducers: from basic models for standard applications up to robust measuring systems for offshore use or for use in hazardous areas. &nbsp; 
Whether for portable use, for rackmounting or for permanent installation, or even for offshore use: FLEXIM offers the appropriate FLUXUSR G to meet each measurement challenge. ATEX and FM certified measurement systems for use in hazardous areas are available. Versatile process interfaces assure optimal integration into the user's process. &nbsp; 
Typical Applications: Gas Storage Facilities Gas Transmission Natural Gas Extraction Chemical Industry Petrochemical Industry Offshore Manufacturing Industry]]></description>
            <pubDate>Mon, 06 Sep 2010 10:26:43 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/6f4fe71a27.png" length="10263" type="image/jpeg"/>
        </item>
        <item>
            <title>PIOX® R Process Insight Through Transmitted Light Process Refractometer Yields Reliable Process ...</title>
            <link>http://www.pcne.eu/content/new-products/pcn/pioxR-r-process-insight-through-transmitted-light/index.html</link>
            <description><![CDATA[Refractive index measurement makes a determination of the concentration or density of liquids possible. For many measuring tasks, refractometry is a standardized method introduces long ago, for instance for the determination of the concentration of sugar solutions. Basically, whenever a refractometer is used to measure in the laboratory, it is also suited for the same task in the process. Additionally, the process refractometer PIOX® R can be used for many applications where measurements were done by a different method up to now, or not at all. &nbsp; 
PIOX® R measures with transmitted light. The refraction measurement occurs directly in the probe volume flow and not indirectly at the boundary layer. This method is especially reliable and not affected by deposits. &nbsp; 
Typical Applications: Chemical Industry Oil and Gas Industry, Petrochemistry olymer and Fiber Chemistry Food and Beverage Industry Pharmaceutical Industry]]></description>
            <pubDate>Mon, 06 Sep 2010 10:26:17 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/f130424fb8.png" length="12167" type="image/jpeg"/>
        </item>
        <item>
            <title>Flow monitor with high switch accuracy for fluids</title>
            <link>http://www.pcne.eu/content/new-products/pcn/flow-monitor/index.html</link>
            <description><![CDATA[Flow monitors in the series RVM/UM from Meister Stroemungstechnik are specially designed for applications in which the monitored flow limit value is much smaller than the normal operating flow. Thus, the smallest practicable switch-off point is 0.1 l/min, at a recommended maximum operating flow rate of 120 l/min. The device is specially constructed to attain a wide operating range at high switch accuracy and minimal pressure loss. At flow rates in the range of the desired limit value, the lower part of the measuring piston is closely fit into a cylindrically bored hole, so that the desired switch point can be precisely adjusted. The switch-off point, as well as the switch-on point is located in this range. As volume flow increases, the measuring piston emerges from the cylindrically bored hole and provides a much larger cross-sectional area for the flow medium.&nbsp; Through the installation of a spring, which returns the piston to its initial position, the flow monitor can be operated in any orientation. Electrical control is accomplished by equipping the piston with magnets, which energize a potential free, bistable reed contact housed separately along side the flow monitor body. The reed contact is completely sealed within the housing, whereby, depending on the connection used, (plug socket or cable), a protection class of IP65 or IP 67 may be attained. The compact design, robust construction, high pressure- and temperature resistance, allow these devices to be employed in the most demanding environments. In the standard version, the flow monitor has a maximum operating temperature of 120 °C; the high temperature version is employable to 160 °C. Maximum operating pressure is 250 bar and 300 bar respectively. Switch contacts are available as normally open or change over contacts. The switch points, specified by the customer, are factory set and tested, and can range from 0.1 l/min to 30 l/min. Switch points over 3 l/min have an accuracy of ±5 % of switch value. The accuracy under 3 l/min is ±0,1 l/min. The flow monitor is also available in an EX-version to comply with ATEX standards.]]></description>
            <pubDate>Wed, 01 Sep 2010 17:40:02 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/629cd85f3f.jpg" length="9474" type="image/jpeg"/>
        </item>
        <item>
            <title>New Flow Monitors with bypass for large volume flow</title>
            <link>http://www.pcne.eu/content/new-products/pcn/new-flow-monitors/index.html</link>
            <description><![CDATA[Meister Stroemungstechnik presents a new series of float equipped flow monitors that is particularly suited for monitoring large volume flows. The series WBM-65 was developed for applications, where electrical limit monitoring of large volume flows is required, but monitoring by means of electronic measurement methods is not possible or too complicated. The WBM-65 devices use the mechanical float principle with all its benefits. They excel through rapid reaction times, reliability and robustness. For electrical monitoring the piston-shaped floats are equipped with magnets controlling a reed contact attached outside the housing. This contact is installed in a moulded switch-gear housing that ensures compliance with protection class IP65 or IP67, depending on the selected connection-type (connector or cable). The reed contact does not require an additional power supply. The integrated return spring allows installation of the device in any position. To minimize pressure loss, the device is equipped with an integrated bypass. Through this mean, the flow monitor has a maximum pressure loss of 0.3 bar for flow within its measuring range. At the same time, the compact design and robustness of the device is preserved. The standard version can be used up to 100°C, whereas the high-temperature version can be operated at up to 180°C. The burst strength depends on the flanges used. For high-pressure applications, a version with threaded connections is available on request. The switch point can be set within a range from 6 to 23m3/h. The value required by the customer is preset and tested on a test stand at the factory. In addition to the version for water and watery media, Meister also offers a version for oils. Besides the standard contacts, explosion-protected switching contacts according to ATEX are available.]]></description>
            <pubDate>Wed, 01 Sep 2010 17:39:44 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/3b5ea61549.jpg" length="13069" type="image/jpeg"/>
        </item>
        <item>
            <title>Get into the flow Product Overview from Meister Stroemungstechnik</title>
            <link>http://www.pcne.eu/content/new-products/pcn/get-into-the-flow/index.html</link>
            <description><![CDATA[The 24-page product overview from Meister Stroemungstechnik stands out due to its clearly arranged structure. Thanks to the exceptionally well-designed and colorful pictograms and high quality photos, product data can be referenced quickly. The product line is divided into 14 color coded product groups and encompasses the areas flow monitors and flow indicators with sight glass, in full metal version, for oil (viscosity compensated), plastic flow meters and monitors, flow sensors with impellers or turbines, paddle switch and target-disc flow meters, volumetric flow meters, magnetic-inductive flow meters, ultrasonic flow meters, calorimetric flow switches, as well as filters and strainers, flow limiters, and electronic and mechanical accessories. A short description of the company on the inside cover and a picture series at the back of the product overview provide a “look inside” Meister Stroemungstechnik. The catalog is available in German and English.]]></description>
            <pubDate>Wed, 01 Sep 2010 17:16:19 +0100</pubDate>
            <enclosure url="http://www.pcne.eu/typo3temp/pics/46710cd3e5.jpg" length="21676" type="image/jpeg"/>
        </item>
    </channel>
</rss>
