Posted on September 20, 2010 - ( views)
The Alldur stator material for Allweiler’s progressing cavity pumps was developed for use in sewage treatment plants and for pumping abrasive wastewater. The elastomer's chemical composition increases service life by up to three times. Alldur stators are now available in all of the company's progressing cavity pumps. Allweiler produces every part of their progressing cavity pumps; stators are particularly important and must be carefully matched to the pumped liquid. Twenty combinations of elastomers are available so the customer gets the most economical solution possible. The Alldur stator can stay in service for up to three times longer than other stators. The composition of Alldur is adapted to provide maximum resistance to mechanical influences. Wear is very low, even when the pump moves highly contaminated wastewater with a high proportion of solids for long periods of time. The stator is also elastic and exhibits high tensile strength. It has high tear-growth resistance and can be used across a wide temperature range. Edited by: Constanze Schmitz
The May issue of PCN Europe features a product focus on plant networking, read about explosion protected computer that enable mobile maintenance out in the installations or find out how a process control system in dairy production allowed for wider variation and higher production. In our industry special on the chemical and pharmaceutical industry we look at monitoring and batch control at chemical distributor and find out how the cooperation of two specialist companies lead to a syringe handling solution with a small footprint. We are always happy to receive your comments and remarks. Enjoy your reading. This edition also presents you with many other application stories and product news from all areas of the processing industries, enhanced with datasheets and videos.