Filling Milk Powder into Cans

  Enquiry / contact me

Corresponding knowledge and expertise are required to construct machines with a modular design that are capable of filling the milk powder cleanly, precisely and efficiently into the cans. This is why Swiss Can Machinery selected Kollmorgen

Equipment & Services, Explosion Protection & Safety

Filling Milk Powder into Cans
Filling Milk Powder into Cans
Filling Milk Powder into Cans
Filling Milk Powder into Cans
Filling Milk Powder into Cans
Filling Milk Powder into Cans

A solution for different applications and industries: the filling and packaging systems at Swiss Can Machinery AG shows how this objective can be achieved. The Swiss company turns to stainless steel motors for the actuators, for example when these systems are used for pharmaceutical products. Motors with Washdown Food coating are used when the hygiene requirements of the food industry are crucial, along with “completely normal” synchronous servo motors in areas with low requirements related to food safety. The benefit of this concept is that the entire control technology including motion control can be retained, which ultimately reduces the development time significantly.

“With the motors we were looking for a manufacturer that would supply us with convenient motors and also with a high-hygiene version. One set of motors is for standard machinery construction and the other motors are for machines used subsequently in pharmaceutical manufacturing. This is how we ultimately came to Kollmorgen in our search for stainless servo motors”, says Marc Grabher, Technology Director at Swiss Can Machinery, regarding the beginning of their collaboration with Kollmorgen.

He remarks that access to an extensive range has the advantage that motors can be exchanged very easily without losing time in engineering. Swiss Can uses different synchronous servo motors with single-cable connection technology from Kollmorgen, means that the basic programming for a system can be retained, irrespective of whether the systems are being used for filling coffee or milk powder. The machinery installation with just one cable between the AKD servo controller in the control cabinet and the selected motor in the machine also remain unchanged.

Drive technology scaled to fit perfectly 

Swiss Can Machinery could alternatively resort to the biggest common multiple in relation to the equipment use for all application cases. Yet this would mean using technology that is totally excessive for many applications and would therefore be too expensive. “Different ranges of machinery are also not an option for us because we are just too small for that”, explains Marc Grabher. The mechanical engineer founded the fast growing company in Berneck by Lake Constance in 2013 together with his brother Michael. Given this narrow focus, the packaging specialists were looking for suppliers that were able to cover the widest possible range of uses for development of their filling, transportation and packaging modules based on scaled technology. 

“When we look at the whole picture in terms of automation, then we are dealing with machines that are the same in relation to the control engineering, but which just need to have their motors adapted”, says Silvester Tribus. The CEO of TBM Automation AG based in Widnau provided intensive support to Swiss Can with the engineering as a channel partner of Kollmorgen. In practice for instance access to the stainless steel motor from the Kollmorgen AKMH range is reduced at most in order to fit a flange. “We could not find any comparable manufacturer with such a consistent range available that is right for us”, highlights CTO Marc Grabher.

Special products in small batches

Typical tasks completed by the Swiss company’s machines include filling with powder, specifically special milk powder for babies who for instance have kidney diseases. “We’re talking about products that can cost 100 euros for a 900 gram can”, says Marc Grabher regarding the market where his company’s systems are in demand internationally. They are so successful because the relevant well-known machine builders are very good for filling high-speed lines of between 200 and 300 cans a minute, but they are far too inflexible and are too big and expensive when it comes to smaller production quantities. 

Production batches that change frequently with different filling quantities and varying types and sizes of containers: this is precisely where Swiss Can Machinery demonstrates its high performance levels time and time again. The systems have a compact design with their production output of between 20 and 80 cans per minute, and they can also be modified very easily while saving time. This makes them an attractive option for companies that manufacture highly priced special products that change frequently in comparatively small quantities.

Reducing conversion times

The design for complete format sets plays a vital role in reducing unproductive conversion times. Given that the milk power market is an international one, Swiss Can Machinery also faced the challenge at the early development stage that continental practices with the control technology were an additional factor in terms of the relevant national language. Swiss Can uses a Siemens S7 1500 as its standard PLC, although it does allow for conversions to another particular controller type and manufacturer based on customer requests. The Swiss company is able to offer this level of flexibility without complex adjustments to the programming and communication because the process control itself is separate from the motion control. The motion control operates in the AKD servo controllers from Kollmorgen and in future will run in the Motion Controller PCMM for tasks requiring greater computational intensity. The small device is also used in lots of other applications as a central transmission point between different communication protocols. Swiss Can for instance connects the AKD servo drives to the controller via a Modbus.

The interfaces in particular between the drives, PLC, motion and further actuating elements such as the sensor system are generally a major issue in machine construction. “You spend hours on this”, says Danijel Todorovic, project manager at TBM, from experience and from the close collaboration with Martin Rupf, application engineer at Kollmorgen in the Swiss region of Neuhausen am Rheinfall. “There is often a fear of the interface, which is why flexible interfaces are required”, highlights Silvester Tribus. For Marc Grabher challenges such as these are the reason why his company attaches so much importance to intense cooperation with system partners. “We know how we want our machines to look and what they need to do. Yet we need support with connecting the control technology so that we can configure machines and deliver more quickly”, says the technical director. 

Author: Sandra Becker, Marketing Communications Manager EMEA & India, at Kollmorgen 

Posted on September 22, 2017 - (487 views)
Kollmorgen Europe GmbH
Pempelfurtstraße 1
40880 Ratingen - Germany
View full company profile
Related articles
Always Working When You Need It
The Italian Manufacturer of Rupture Discs
ADIPEC - Abu Dhabi International Petroleum Exhibition & Conference November 9 - 12 2020
Which Enclosure Cooling Measures for Food & Beverage?
Always Working When You Need It.
Intelligently Combined
Offering Diversity. Ensuring Protection. Perfecting Performance.
Always working when you need it
Always Working When you Need it
Wearable Camera & Thermal Imager
Piezoresistive Pressure Transmitters
Pneumatic Stoppers
BLE-Beacon Technology
The Italian Manufacturer of Rupture Discs
The Italian Manufacturer of Rupture Discs
Onshore and Offshore Safe Networking
Laser Gas Detection Modules
Thermally Conductive Epoxy
Protect Machines Using Sound, IoT and AI
Spiral Retaining Ring
Portable Area Lighting System 9455Z0 RALS
Pneumatic Stoppers
Flameless Venting
Clean Room Station
Compressors Control Unit
European Plant with Boosted Process Equipment Manufacturing Capability
Torque Sensors and maXYmos TL Monitors
Air Operated Hoists Profi TI