HANNOVER MESSE 2020 cancelled

  Enquiry / contact me

Due to the current development of Covid-19 infections in Europe and worldwide, HANNOVER MESSE cannot be held in July as planned. Deutsche Messe, the event organizer, has issued this latest press release on the subject:

HANNOVER MESSE 2020 cancelled
HANNOVER MESSE 2020 cancelled

Hannover. The world of industry will not be able to meet in Hannover this year. Comprehensive travel restrictions, bans on group gatherings and a prohibition decree in the Hannover region make it impossible to stage HANNOVER MESSE. At the same time, the corona crisis is affecting the economy, and the manufacturing industry – HANNOVER MESSE’s core clientele – is already struggling with serious consequences of the pandemic. Demand and sales in German industry are declining, resulting in supply bottlenecks, production stops and reduced working hours for employees.
 
“Given the dynamic development around Covid-19 and the extensive restrictions on public and economic life, HANNOVER MESSE cannot take place this year,” says Dr. Jochen Köckler, Chairman of the Board of Management, Deutsche Messe AG. “Our exhibitors, partners and our entire team did everything they could to make it happen, but today we have to accept that in 2020 it will not be possible to host the world's most important industrial event.”
 
It is the first time in HANNOVER MESSE’s 73-year history that the event will not take place. However, the organizers will not let the show completely vanish. “The need for orientation and exchange is particularly important in times of crisis,” says Köckler. "That is why we are currently working intensely on a digital information and networking plattform for HANNOVER MESSE that we will open to our customers shortly.”
 
Various web-based formats will enable HANNOVER MESSE exhibitors and visitors to exchange information about upcoming economic policy challenges and technological solutions. Live streams will transport interactive expert interviews, panel discussions and best-case presentations all over the world. The online exhibitor and product search is also being enhanced, for example with a function that enables visitors and exhibitors to contact each other directly.
 
“We firmly believe that nothing can replace direct, person-to-person contact and we are already looking forward to the time after Corona,” says Köckler. “But especially in times of crisis, we must be flexible and act pragmatically. As organizers of the world's most important industrial trade fair, we want to offer orientation and sustain economic life during the crisis. We are doing that with our new digital offering.”
 
Thilo Brodtmann, executive director of Germany’s Mechanical Engineering Industry Association (VDMA), said, “The cancellation of HANNOVER MESSE 2020 is an unfortunate decision, but it is the only correct one. The mechanical engineering industry must now concentrate on minimizing the consequences of the pandemic in its own operations so that it can start up again. In April 2021, the engineers will be back in Hannover in full force.”
 
Wolfgang Weber, Chairman of the ZVEI Management Board: "The fact that Hannover Messe 2020 cannot be hosted is a bitter loss, but it is the right decision. For the electrical industry, the fair is the showcase to the world, which unfortunately remains closed this year. So our companies will use the time until 2021 to manage the considerable consequences of Corona. Next year, they will then present themselves with the latest products and solutions for Industry 4.0 and the energy system of the future.”
 
HANNOVER MESSE 2021 will be held from 12 to 16 April 2021.
 

Posted on March 26, 2020 - (8 views)
Related articles
Warburg Pincus Completes Acquisition of Sundyne
Waste Water Pump With Efficient Hydraulic System
New Player in Flow Technology
Universal Uni-/Bipolar Signal Transmitter
Ultrasonic Transducer for Gases
Sensata Launches New Low Noise Solid State Relays
Lightweight Oxygen Analyzer
High-Performing Sanitary Components
High-Performance Actuator Control Unit
pH Sensors With Advanced Analytical Capability
The Groundbreaking, Affordable OGI Camera
Always Working When You Need It
The Italian Manufacturer of Rupture Discs
PCNE Offers You a Free Ticket to Hannover Messe: Scan the QR-Code.
Our Solutions, as Individual as You.
ADIPEC - Abu Dhabi International Petroleum Exhibition & Conference November 9 - 12 2020
Transformation is Everywhere.
Which Enclosure Cooling Measures for Food & Beverage?
The Ultimate Solution for Temperature and Gas Monitoring
Always Working When You Need It.
Sensata Launches New Low Noise Solid State Relays
Multifunctional Transmitters for SIL and Ex Applications
Low-Cost Optical Gas Imaging Camera for Leak Detection
Benchtop Lab Gas Analyzer for Hydrogen Sulfide
Safeguarding Staff from Carbon Monoxide Leaks
Achieve the Highest Lockout/Tagout Safety with Highly Innovative SafeKey Lockout Padlocks
FIND OUR NEW RANGE OF RUPTURE DISCS AT ADIPEC 2019
Modbus Temperature Probe
Affordable OGI Camera for Methane Detection
Brady Inspection Timer
Sensor for Easy Condition Monitoring
Achieve the Highest Lockout/Tagout Safety with Highly Innovative SafeKey Lockout Padlocks
Brady Inspection Timer
HD Optical Gas Imaging Camera Improves Inspection Safety
Flowmeter for the Precise Detection of Media Changeover
Digitalization will be the Number 1 Trend at ADIPEC 2018
Efficient Supply and Transport of Goods
Vial and Bottle Labeller
Spiral Retaining Ring
Portable Area Lighting System 9455Z0 RALS