Aucotec Presents its PdM Solution at Hannover Messe

Aucotec's system allows accurate and optimized predictive maintenance operations thanks to the direct connection to the database-driven software Engineering Base (EB)

  • February 23, 2016
  • 153 views
  • The Engineering Base (EB) platform to be unveiled at Hannover Messe
    The Engineering Base (EB) platform to be unveiled at Hannover Messe

The CAE provider Aucotec will show at 2016 Hannover Messe how much connecting the engineering system when configuring predictive maintenance (PdM) solutions reduces the amount of work and errors. Aucotec's database-driven software Engineering Base (EB) can be used for this purpose as a central source which provides both the PdM and the control system in parallel with all relevant data.

Manually "feeding" big data?

PdM systems are big data applications that calculate optimised maintenance intervals from the analysis of the huge amounts of live plant data sent continually by the control system or identify an impending breakdown in advance.

The correct interpretation of the measured status data is required for the analysis. For this purpose, the PdM system must first understand, however, that the value x to signal y indicates, for example, a certain pressure on a certain sensor and not a temperature. Aucotec's solution enables the PdM to obtain this knowledge directly from the software platform EB. The engineering information previously had to be read manually into the PdM or via various interfaces and lists that had to be compiled laboriously. This signifies a mammoth task for often 50,000 or more control system signals, even without the usual plant changes in operation.

Single source of truth

The close connection to the PdM is only possible because EB can represent abstract objects, e.g. measurement types such as bar or degrees Celsius, which are classified under a sensor. Such information cannot be mapped without the database-driven platform because it is not included in circuit diagrams or P&IDs.

The engineering platform EB is not only the "single source of truth" of all technical data of a plant, but also its transfer characteristic. These specifications can be used simultaneously for the configuration of the control system and the PdM. Thus the PdM system can always clearly interpret the live data without any additional work involved.

50% reduction in maintenance costs

EB's PdM connection is already used by a large, globally operating machine manufacturer, which offers global maintenance of its customers' plants. It expects a reduction of about 50% in its maintenance costs as a result.

"EB's PdM support shows that predictive maintenance is not rocket science, but an efficient and feasible practice already implemented along the path to Industry 4.0", explains Executive Officer of Aucotec Markus Bochynek. "It saves us an enormous amount of work, which would be necessary if the PdM could not consistently link live data and engineering data". He believes: "The more complex the engineering tasks, the more comprehensively the EB platform works!" However, the fact that the PdM solution fits so perfectly to this year's Digital Factory focus at Hannover Messe wasn't anticipated according to the Executive Officer.

Aucotec at Hannover Messe 2016: Hall 6, Stand K17