The new JUMO dTRANS T06 Ex transmitter has a compact mounting rail case, which has a design width of just 22.5 mm, and the encoded plug-in terminals enable the device to be quickly installed into control cabinets. Its measurement input features 22-bit resolution with selectable noise suppression and is extremely precise. The SIL option fulfills the requirements of SIL 2 / SIL 3 according to DIN EN 61508 and PL c / PL d according to DIN EN ISO 13849. The JUMO dTRANS T06 Ex also meets the ATEX and IECEx requirements up to zone 0.
A particularly high galvanic isolation guarantees excellent signal stability, even when measuring conditions are difficult. Intuitive operation takes place via 4 keys and an LCD display, which can also be used to display information about the measuring point. Reliable SIL configuration is facilitated by an easy-to-use setup program. As a special feature, the device display can also be used to access a connection diagram that is based on the configuration.
The device can be used with RTD temperature probes, thermocouples, resistance transmitters, as well as voltage and current signals. It converts the input signal into an output signal (0(2) to 10 V or 0(4) to 20 mA). The universal measurement input with 22-bit resolution ensures maximum measuring precision with the JUMO dTRANS T06 Ex. In addition, the device can be reliably replaced when performing calibration and maintenance work. All the important information regarding the transmitter can be queried and visualized via an RS485 interface.