Smart Retrofit kit for Dial Thermometers

Platinum-chip sensor with transmitter for analog or digital signals

  • Smart Retrofit kit for Dial Thermometers
    Smart Retrofit kit for Dial Thermometers

The JUMO dicoTEMP 100 combines the strengths of several devices. With the new solution, users can continue to use any devices that are already part of the process at the same measuring point and, at the same time, extend them functionally with electrical temperature measurement.

Stainless steel fitting

The combination of a platinum-chip temperature sensor and a thermostat or dial thermometer in one fitting significantly reduces planning and installation effort. The fitting is made from stainless steel and is available in different connection types: for screwing in or inserting to a flat tube. The insertion length varies between 65 and 300 mm, depending on the customer's wishes. The dicoTEMP 100 can be used at process temperatures ranging between -40 and +260 °C.

Flexible data transfer

A resistance signal is transferred via an industry standard M12 connector. Using a cable transmitter, other output signals can be relayed in an analog (4 to 20 mA) or digital (IO-Link) manner, which ensures the highest degree of flexibility in data use. In addition, great variability results from the use of different device types, platinum sensors, and probes as well as immersion sleeve diameters. Its Plug and Play functionality makes the dicoTEMP 100 the ideal partner for retrofitting existing equipment such as transformers, compressors, and hydraulic units.