Standardization provides the basis for digitizing the process plant
Pharmaceutical powders form the basis for numerous antibiotics that are essential for comprehensive medical care. However, margins are low and production conditions are complex. This has led to a shift of manufacturing capacities to lower-cost markets. With this development in mind, how can supply bottlenecks be avoided? And what does it take to revive local production?
Sensor analyses gas or air contents in liquids
Modular system allows for easy mounting and service in the field
The new European HQ of Fluke in Eindhoven, Netherlands is home to a 400sqm customer experience centre to allow customers to experience using products in realistic environments.
Endress+Hauser has expanded its center of competence for silicon pressure sensors in Stahnsdorf near Berlin, Germany at a cost of more than 12 million euros. A new production hall was added to the existing building to serve the growing demand for silicon pressure instrumentation. The expansion also includes a new office and laboratory building, as well as a large outdoor area and additional parking.
Specially developed valve for installation with plastic pipes
Fraunhofer researchers develop sensors for fire and explosion protection
Accurate and process-safe measurements in gas storage facilities
"Untouched since the ice age" is not a marketing slogan, but a fact - a real piece of the ice age that still exists today: When the ice melted, immense amounts of water drained away into the rock of the Swabian Alp mountains. The earth shifting in an unusual way then caused this reservoir to be sealed off approximately 400 meters below the outside world. As a result, EiszeitQuell has an original purity and quality - just like water over 10,000 years ago.
Users in process automation have the most to gain from insight through data from sensors and actuators. This is where the advanced physical layer for Ethernet, short Ethernet-APL comes in, the data highway to the field of process plants. Many questions must be answered when deploying Ethernet-APL for the first time. This article discusses topologies for Ethernet-APL that can be realized with currently available infrastructure components.
Even under normal conditions it is not simple to always have the right motor on hand to address a wide range of applications. It is all that much more difficult in large chemical companies if several thousand drives have to be kept running around the clock in harsh explosive environments. In the future, one of the largest chemical companies in the world will be depending on a team of external specialists and the comprehensive range of Simotics XP explosion-protected motors from Siemens.
Futureproof secure switches in a broad range of configurations
NatureWorks’ new bioplastics plant in Thailand is set to produce 75,000 tons of Ingeo™ PLA biopolymer per year – integrated process from fermentation to polymerization enhances supply chain reliability
The Endress+Hauser Group will soon be managing its worldwide logistics network from a single operations center in Ireland. A team of specialists is tasked with managing the day-to-day operation and enabling the smooth and sustainable movement of goods.
Process moisture analyzer for biomethane injection stations
Market access in the United Kingdom: Schmersal Group receives certificate for solenoid interlocks as transition period for British market ends 2022
Moore Industries announces the addition of more than 1,000 product 3D CAD models to their online catalog, now available for download in multiple file formats for use in most popular CAD design systems.
PROFINET technology continues to see growing interest and acceptance in process automation. To cater to the high level of interest in and demand for an easy-to-understand introduction to digital communication in field automation and the digital transformation, PI (PROFIBUS & PROFINET International) is offering an internationally oriented series of workshops on this topic.
Around three years ago, EBRO ARMATUREN worked closely with its customers to develop a butterfly valve adapted specifically to the requirements of the chemicals industry. A prototype has already been deployed in the food and beverage sector, including at Schneider Weisse. Besides the FDA compliance required with regard to food and pharmaceutical technology, resistance to chemically aggressive media...
Certified in line with the new testing standards
Reliable measurement of hydrogen in gas networks
ODVA announced today that The EtherNet/IP™ Specification has been enhanced to enable EtherNet/IP networks to support the Ethernet-APL physical layer for process automation. Licensed Vendors for the EtherNet/IP technology can immediately start developing EtherNet/IP components for Ethernet-APL, including controllers, power switches, field switches, and instrumentation.
In Germany, 55 percent of final energy consumption goes towards heating and cooling. However, a lot of heat dissipates unused because it is not generated as and when required. Thermal storage using zeolite material allows heat to be stored for long periods of time without losing any. Fraunhofer researchers are now working on significantly improving the thermal conductivity of zeolites.
Zero liquid discharge(ZLD) is a waste management technique which transforms liquid waste streams from industrial plants into clean water, which can be reused in the process, and a minimal amount of solid residue, which often include valuable by-products.
Free virtual Ethernet-APL Technology Workshop offered to users on October 5 and 6
Glenn Schulz, Managing Director at FDT Group, gives us the details of the FDT 3.0 IIoT ecosystem, as well as insights on smart manufacturing and mobility, CIP security enhancements and 5G technology
We interviewed Andreas Hennecke, Pepperl+Fuchs Product Marketing Manager and Ambassador for Ethernet-APL about the development and possibilities of Ethernet-APL for the process industry.
Process plants are often very extensive. Many of the plant components are interlinked and their functions coordinated. People who work in this area of plant construction know that there is generally less effort and expense involved in building a new plant, rather than adapting the existing one to meet new requirements. Despite the numerous challenges – and the restrictions imposed by the Corona pandemic and its consequences – the new and renovated production reactors went into operation again right on schedule.
CAN-based communication with Wi-Fi or Bluetooth for mobile automation
Emergency switches and belt misalignment monitor for safe and reliable shutdown
For safe manucfaturing processes without foreign bodies
Digitalised safety with new diaphragm seal system
Working Group is going to test the fueling of melting furnaces with hydrogen
Two weeks to go until ACHEMA Pulse starts: More than 900 exhibitors present will present their innovations
Auto hotspot finder and motor focus enable optimal use
Reliable and high-performance wireless connectivity with maximum data transmission rates
Easier handling and maintenance through non-combustible and non-toxic refrigerant
The modern employee increasingly works in an agile environment. This also includes the workplace. Here, access to all relevant information and data is necessary when working from home, in the office, in the factory or on the factory premises.
“Size changeover” is not necessarily a term that immediately makes people stop and pay attention in the pharmaceutical industry. However, considering the challenges in pharmaceutical manufacturing, which are characterized by cost and competitive pressure as well as strict regulations, intelligent size changeover means competitive advantages in terms of efficiency, product quality and process reliability.
Digital Edition Download PDF
