Tuesday, 21 November 2017

Log in

Please log in to access all content
and functions.

Industrial Applications

Coriolis flowmeters

To monitor the quality of its discharged water, a manufacturer of dairy products uses a custom-made cabinet containing all necessary instruments and analyzers, and allows for data acquisition, remote transmission, recording and monitoring of all informati

Posted on March 4, 2011 - ( views)

by

High temperature Coriolis flowmeters enable accurate and reliable measurement of extremely abrasive high temperature, high viscosity fluid. BearCat Pumps of Phoenix, Arizona, is using Micro Motion ELITE high temperature Coriolis mass flowmeters from Emerson Process Management as part of its metering systems for rubberised asphalt, an extremely abrasive, high temperature and high viscosity fluid. The Micro Motion meters enable accurate and reliable measurement of the difficult-to-handle fluid. “Pumping rubberised asphalt is a very challenging application that combines heat, pressure and an abrasive material,” said Kevin T. Hill, President, BearCat Pumps. “Our experiences with other technologies have confirmed Micro Motion high temperature Coriolis meters as the best choice, as they consistently deliver the accurate readings our customers demand.” There are two stages in the rubberised asphalt production process where material is blended and then mixed. Measurement accuracy is critical to ensure the correct blend ratios are maintained. BearCat previously used mechanical gear pumps for flow measurement, but the abrasive asphalt caused wear in the pumps, which allowed measurement accuracy to drift. The company solved this problem by incorporating a high temperature Coriolis meter into its metering systems, which also include a pump and a relief or bypass valve. At start-up, heat and pressure are applied to the relief valve and sensor allowing the asphalt to circulate. The sensor of the Coriolis meter is heated using heat-jacketed surfaces that are connected to the existing heating circuit and the complete sensor is then wrapped with an insulating cover. Developed for harsh environments, the meter is suitable for process temperatures up to 350ºC. Its transmitter can be mounted remotely to protect it from the heat, and the sensor can be installed anywhere with no flow conditioning or straight pipe run required. With no moving parts, the Micro Motion flowmeter requires no maintenance or repair. To ensure accurate measurements are maintained, the ELITE range features in-line meter verification. This capability enables BearCat’s customers to check the sensor tubes and electronics against original factory settings while the meter is in line and the process is flowing, These features make the Micro Motion ELITE high temperature Coriolis meters especially suited to the harsh operating environments associated with pumping asphalt. Other applications include high temperature processes such as the handling of heavy crude, bitumen, monomers, polymers, wax and cooking oils that are difficult to control and keep below a set temperature limit.


Request Free Information

Log in with your PCNE.eu account

Create an account - Forgotten your password?

Please fill in your contact details
Go to top

Create an account - Forgotten your password?

About : Emerson Process Management Europe
Emerson Process Management  Europe

Company Profile

View Address - Phone - Fax

Blegistrasse 21

6341 Baar

Tel.: +41-41-7686111
Fax: +41-41-7686300


More from this supplier on partner websites


More products from this supplier

Get a subscription to PCN Europe

Since 2004 PCN Europe has been the reliable resource chosen by industrial decision makers when searching for new products and solutions in the areas of processing and control.

Read PCN Europe